Kapton® Tape
1 Mil - KT1 / 1/8 in
$9.60
Sale price
$9.60
Regular price
Skip to product information
Kapton® Tape
$9.60
Sale price
$9.60
Regular price
Product Specifications:
| Specification | 1 mil (KT1) | 2 mil (KT2) | 5 mil (KT5) |
|---|---|---|---|
| Color | Amber | Amber | Amber |
| Adhesive type | Silicone | Silicone | Silicone |
| Polyimide film backing thickness | 1 mil | 2 mil | 5 mil |
| Total thickness | 2.5 mil | 3.5 mil | 6.5 mil |
| Tensile strength | 32 lbs/in | 53 lbs/in | 95 lbs/in |
| Elongation | 40% | 45% | 50% |
| Dielectric strength (V/mil) | 7900 | 12500 | 19500 |
| Max. recommended operating temperature | 500°F / 260°C | 500°F / 260°C | 500°F / 260°C |
| Roll length | 36 yards | 36 yards | 36 yards |
| Adhesion to steel (oz/in) | 25 | 25 | 25 |
DuPont reports that Kapton® Type HN polyimide film has been used in applications up to 752°F / 400°C. That figure describes the film alone, not the adhesive-backed tape. The maximum recommended operating temperature listed for this silicone-adhesive tape is 500°F / 260°C.
Usage: electrical applications (coil insulation, capacitor wrapping, magnetic wire insulation, wave soldering, high temperature masking, 3d printer bed adhesion, labelling applications, etc...)
TLDR Details:
- Silicone adhesive
- Maximum recommended operating temperature: 500°F / 260°C
DuPontTM and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Need help choosing? Read our Kapton® tape technical selection guide for thickness, temperature and application advice.
Bulk Order? Request a Quote
You may also like
M
it's just as good as some of the more premium brands but at a much better price. will buy again.
J
I’ve reordered this several times for manufacturing use and the quality has remained consistent every time. No splitting edges, no weak adhesive spots, and excellent heat resistance. Works just as well as other brands and hard to beat for the price.
A
Arrived quickly.
D
used it for masking while soldering and removed cleanly with good temp resistance
C
I applied it for masking during epoxy curing and it removed cleanly. Saved me a lot of cleanup work. Would recommend.
K
Bought this for my 3D printer bed and it’s been fantastic. The tape applies smoothly with no bubbles and holds up really well under repeated heating cycles. Adhesion is strong without being impossible to remove. Definitely ordering more.